+46735008541

🇬🇧 UK & Ireland — Nano‑Silica Concrete Densifiers & Sealers (Direct Supplier)

Advanced nano‑silica concrete densifiers and sealers — supplied directly to distributors across Europe.

Poleradbetong Sverige AB is a Swedish manufacturer of advanced nano‑silica concrete densifiers and sealers. We supply flooring contractors, industrial clients and distributors across Europe — including the UK and Ireland — with high‑performance products designed for polished concrete, industrial floors and long‑term surface protection.

Our NS Series delivers deeper penetration, stronger crystalline bonding and higher DOI gloss than traditional silicate and lithium densifiers commonly used in the UK market. Contractors switching from lithium densifiers typically report sharper clarity, faster polishing response and longer‑lasting performance with our nano‑silica system.

Our Products

Concrete Densifier NS

Nano‑silica densifier for deep hardening, dustproofing and high‑clarity polished concrete finishes. Designed for industrial floors, warehouses, retail spaces and polished concrete installations requiring maximum durability and gloss.

Concrete Shield NS

Nano‑silica impregnation and sealer providing moisture, chemical and stain resistance with a premium “wet look” when burnished. Ideal for high‑traffic environments, commercial interiors and polished concrete surfaces requiring long‑term protection.

Why Nano‑Silica Instead of Lithium?

Nano‑silica technology offers several advantages over lithium densifiers:

deeper penetration into the concrete matrix
stronger crystalline bonding
higher DOI gloss and optical clarity
faster polishing response
improved long‑term durability
reduced maintenance requirements

This makes nano‑silica the preferred choice for premium polished concrete systems across Europe.

Flexible Logistics for UK & Ireland

We offer streamlined pallet logistics for all European markets:

MOQ 200 L (10×20 L jerricans)
Mix‑and‑match freely between Densifier NS and Shield NS
Fast dispatch from Sweden
Full technical documentation (TDS & SDS)
Support for distributors and flooring contractors

Verified B2B partners receive a free 2×5 L sample kit for testing.

Distributor Opportunities

We are expanding our distributor network across:

UK
Ireland
Northern Europe
Central Europe
Southern Europe

If you supply concrete chemicals, industrial flooring materials or polished concrete systems, we welcome your inquiry.

Technical Advantages

Nano‑silica penetration
High DOI gloss
Strong crystalline bonding
Moisture & chemical resistance
Industrial durability
Premium polished finish
Compatible with all polishing systems

Applications

Polished concrete floors
Industrial warehouses
Retail stores
Commercial interiors
Logistics centers
Workshops
Public buildings
Decorative concrete

Contact

Poleradbetong Sverige AB Rexegatan 22, 442 34 Kungälv, Sweden Phone: +46 793582953 Email: info@poleradbetong.se

NanO SILICA

Concrete Densifier ns & Concrete Shield ns

Concrete Densifier ns is a fast‑acting nanosilica densifier, hardener and dust proofer ideal for surfaces that will be lightly sanded or mechanically polished. It penetrates deeply into the concrete matrix, creating a highly dense and durable surface.

Thanks to its neutral pH and advanced nanosilica chemistry, it delivers long‑lasting performance, rapid application and a noticeably clearer, sharper finish.

Benefits

Seals capillaries and reduces dust
Increases wear resistance and surface hardness (up to 40%)
Provides higher DOI (Distinctness of Image) than sodium, potassium or lithium silicate densifiers
Easy, user‑friendly application
Low odor — can be applied during normal operating hours
Simplifies cleaning and maintenance

Concrete Shield ns is a water‑based penetrating sealer and densifier that provides hydrophobic, diffusion‑open protection and improves the chemical resistance of concrete floors. It penetrates deeply into capillaries, microcracks and pores without forming a surface film. Inside the concrete, it reacts with salts and minerals to create a hard, crystalline structure that blocks water transport while still allowing vapor diffusion.

Because the protection forms deep within the concrete, it is highly resistant to abrasion and impact and only wears when the substrate itself wears. High‑speed polishing (1500 rpm or more) significantly increases gloss and enhances the final appearance.

Concrete Polishing with Power Trowel

with Concrete Densifier ns & Concrete Shield ns

Our unique 4” diamond pads with built‑in flex and a 10 mm diamond layer deliver high stability and large coverage per set. Available in metal‑bond for fast cutting and resin‑bond for high gloss polishing. Wet polishing removes airborne dust and produces a cleaner, clearer concrete surface than dry grinding.

Developed together with leading diamond tool manufacturers, these pads are optimized for power trowel polishing and attach directly to the Velcro‑covered trowel disc.

Combined with our nanosilica products Concrete Densifier ns and Concrete Shield ns, the system achieves a significantly higher final finish and DOI (Distinctness of Image) than densifiers based on sodium, potassium or lithium silicate.

Power Trowel Polish System Concrete Polishing

Power Trowel Concrete Polishing System

The tools are attached directly to the Smoothing Disc, which is equipped with a Velcro fastening device. Unbeatable low cost

Diamond Pads for Power Trowel Polishing System

Advantages

Low start‑up cost – no expensive holders or suspension systems needed for the diamond tools.
High productivity – covers several times larger floor areas compared to conventional grinding machines.

Diamond Pads for Power Trowel Concrete Polishing

Our unique 4” diamond pads with built‑in flex and 10 mm diamond layer provide stability and high square‑meter coverage. Available in metal‑bond for aggressive cutting and resin‑bond for high gloss polishing. Also available in 3” versions to fit alternative holders.

Wet polishing eliminates airborne dust and produces a smoother, clearer concrete surface than dry grinding.

Pads attach directly to the Velcro‑covered trowel disc.

Performance

Combined with our nanosilica products Concrete Densifier ns and Concrete Shield ns, the system delivers a significantly higher level of DOI (Distinctness of Image) and reflection clarity than densifiers based on sodium, potassium or lithium silicate.

One set (16 pads) covers approx. 1000–2000 m², depending on grit and concrete hardness. Available grits: #50–#400, in both Copper Pads and Resin Pads.

ConcreteShield NS

Concrete Shield ns is a water‑based penetrating sealer and densifier that provides hydrophobic, diffusion‑open protection and improves the chemical resistance of concrete floors. High‑speed polishing (1500 rpm or more) with Concrete Shield NS will significantly increase gloss and enhances the final appearance. It will raise the gloss with 10-20 units or more.

3 Steps Pro Kit Diamondpads

designed for Auto Scrubbers to renovate the concrete floor and deep clean in a simple and cost-effective way for property owners, cleaning companies etc. Pro KitDiamondpads 125 mm pads are designed to restore surfaces, scratches and orange peel. You will achieve a smooth surface.

They are easily attached to the usual cleaning pads under the machine. Use with low speed 150-450 rpm and water. Together with our ConcreteDensifier ns and ConcreteShield ns, they will refine your concrete floor in a simple and cost-effective way.

Hybrid Pads for easy renavating of concrete floors

Hybrid Pads for Renovating concrete floors

Surface Texture Meters

To achieve the best result for a concrete floor when grinding and polishing it, you should have measuring tools such as Surface Structure Meters and Gloss Meters to have control over the process. Many companies in the USA have been doing this for several years now to be able to repeat a good result on different concrete floors. We offer these tools and the knowledge to achieve the optimal end result even for operators who do not have much experience of Grinding and Polishing. The surface texture meter removes the guesswork when it comes to diagnosing the level of scratches in the floor. By measuring the RA level after each tool step, you ensure that you dial the correct RA number before moving on to the next tool. By measuring the surface structure, property owners and architects can know exactly what quality floor they are getting and you as a contractor are aware of the structure level you have achieved before you hand over the grinded and polished floor to your customer.

Polished Concrete

We offer you Innovative technology of Diamond Tools System specially developed to be able to perform many square meters of surface in a rational and cost-effective way.

The floor is grinded and polished several times faster than with conventional technology, which means lower final costs for your customers and this is made wet to eliminate airborne particles.

See what the US Department of State is saying.

"In addition to market demand, wet polishing also protects site staff’s health effectively. In 2016, America OSHA (Occupational Safety and Health Administration) releases a policy named Safety and Health Regulations for Construction, stating that “···all employers of employees exposed to asbestos hazards shall comply with applicable protective provisions to protect their employees···The work shall be performed using wet methods.” OSHA requires employers to try best applying wet method to avoids site staff’s risks of getting Silicosis when doing floor construction works. "

We launch the latest technology from the USA, which is carried out with your riding trophies and our Diamond Tools. Together with the latest consolidation technology based on Nano Silica materials ConcreteDensifier ns and ConcreteShield ns, a higher end result is achieved on abrasion resistance and higher surface hardness than would be achieved with products based on older technology.